The Box Tutorial For PSP6 . 1) Open an image 200X200 transparent. 2) With the shape tool 3) Now go to image + deformations + skew set at horizontal =0 vertical = 20. Copy and paste as new image. (ctrl + c then ctrl + v). 4) Now undo the image + deformations + skew set at horizontal =0 vertical = -20. Then Ctrl + C then Ctrl + V. 5) Now undo then image rotate 45 degrees. Then Ctrl + C then Ctrl + V. 6) Now open a new image 300X300. 7) Now open the first image you copied and copy then go back to the new 300 image and paste as new selection (Crtl+shift+E) and place it off the the left side of the image. 8) Now open the second image you copied and copy it (Ctrl + C) and paste as new selection (Crtl+shift+E) and set it along side of the first one it must touch and aline top to bottom. 9) Now comes the math again you need to measure from one side of the 2 skewed images to the other side.
then from the center of the V to the top of the skew then double that number.
10) Now take these measurements and open the rotated image you copied and resize it to Width 210 height 70 in my case then copy (ctrl + C) then paste on the new 300 image (Crtl+shift+E) and set it on top of the two side's as best you can there will be a small gap so make sure you line up the corner's.
11) Now using the air brush 12) Now if you would like to change the centers use
the magic wand
Copyright © 2000 by GandlfDrgn, all rights reserved
|